Feeds:
Posts
Comments

Posts Tagged ‘bird feeder’

Hi everyone! It’s Cindy here. Lately my Nature Friday posts have been all about the birds and this weeks is no exception. Don’t worry, Millie and Walter are doing well and will be back soon.

Charlie has been working hard in his wood shop this winter to get some new feeders ready for the return of our feathered friends this spring. The first thing he did was work on a new suet feeder.

Tufted Titmouse clings to the side of the old suet feeder

The previous suet feeder, seen above, was just a suet cage attached to a piece of wood and hung from a crook. The feeder was getting old and cracked and needed an upgrade. One thing we wanted to do was cut down on some of the “bully” birds that were able to access this feeder. The new suet feeder now has four sides so only birds that can cling to the bottom such as woodpeckers, nuthatches, tufted titmice and chickadees can use it. Other birds like starlings and grackles aren’t able to hang upside down and won’t be able to use it.

Upside down suet feeder

Since the crook was still in the ground we were able to hang this feeder right away. At first the birds seemed a bit hesitant to use it even though it’s in the same place as the previous one was but after a few days the realized that it contained the same suet they all love. The good thing is that the birds that can’t hang upside down, like cardinals and sparrows,  still get to benefit by hanging out under the feeder to pick up whatever is dropped.

A trio of new feeders – (left to right)
Platform Mealworm Feeder, Double Suet Feeder, Gilbertson Style Mealworm Feeder

Charlie also made a double sized suet feeder. You can see it in the middle above.

Underneath the double suet feeder

This feeder holds two suet cakes at a time and also has sides to prevent the non-clinging birds from being able to use it. The hope is that we will finally be able to attract a Pileated Woodpecker to our feeder. We have seen pileated woodpeckers around our yard but they are too big to use the smaller feeder.

Chickadee on Mealworm Feeder

The other two feeders that Charlie made are mealworm feeders. Our old platform mealworm feeder (above) was about 10 years old and needed to be replaced. The main difference with the new feeder is that now it will be attached to a 1¼” conduit with a strap instead of the wooden bracket you see on the old feeder.

Bottom of Platform Mealworm Feeder

The holes you see are for drainage and don’t really allow the mealworms to fall out. That happens well enough when a blue jay lands in it an starts flinging the mealworms around.

The other mealworm feeder Charlie made is a Gilbertson Style Mealworm Feeder.

Gilbertson Style Mealworm Feeder

Charlie’s version doesn’t follow the plan exactly. His is slightly larger with smaller posts in the corners to allow more room in the interior areas and he uses the same mounting method as the platform feeder above. As you can see this feeder has a cup inside where the mealworms will be placed. It also has metal rods running between the posts on all four sides. This prevents larger birds like starlings, mockingbirds, robins and blue jays from entering while allowing the smaller bluebirds, wrens, chickadees and tufted titmouse access.

How to access feed cup

In order to access the cup for refilling you are able to remove one of the metal rods. On the right, in the first picture of this feeder, you can see that one of the metal rods is bent with a small stop block keeping it in place. When it’s time to refill the feeder you just unlatch the rod and slide it out so you can reach in to remove the cup, which in this case is just a ½ cup measure with the handle cut off.

Once the ground thaws out (in a couple of months) we will be able to put up a new crook for the double suet feeder and put the conduit in the ground and mount our new mealworm feeders to them. The mealworm feeders will also be fitted with squirrel baffles to keep those pesky chipmunks and squirrels from pigging out on mealworms. In case you were wondering we feed dried mealworms which I buy in bulk from Critter Boutique. That is not an affiliate link. I am providing it since I think they have the best price for bulk dried mealworms in case you want to try using them. The suet feeders don’t need squirrel baffles since I only feed C & S Hot Pepper Delight Suet cakes. The birds don’t mind the hot pepper but the squirrels and chipmunks sure don’t like it and never try it twice.

Join the Nature Friday Blog Hop

We are joining the LLB Gang for their Nature Friday Blog Hop. You should pop over to their blog to see all the other posts.

Read Full Post »